Egftnjytyk

Paraffin wax

Identifiers
CAS Number	8002-74-2
ECHA InfoCard	100.029.375
E number	E905 (glazing agents, ...)
UNII	I9O0E3H2ZE
Properties
Chemical formula	CnH2n+2
Appearance	White solid[1]
Odor	Odorless[1]
Density	~0.90 g/cm3[1]
Melting point	37 °C (99 °F; 310 K)
Boiling point	> 370 °C (698 °F)
Solubility in water	~1 mg/L[1]
Hazards
Flash point	200–240 °C (392–464 °F; 473–513 K)[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Paraffin candle

Paraffin wax is a soft colourless solid, derived from petroleum, coal or shale oil, that consists of a mixture of hydrocarbon molecules containing between twenty and forty carbon atoms. It is solid at room temperature and begins to melt above approximately 37 °C (99 °F);^[2] its boiling point is >370 °C (698 °F).^[3] Common applications for paraffin wax include lubrication, electrical insulation, and candles;
^[4] dyed paraffin wax can be made into crayons. It is distinct from kerosene and other petroleum products that are sometimes called paraffin.^[5]

Un-dyed, unscented paraffin candles are odorless and bluish-white. Paraffin wax was first created in 1830 in Germany^{[citation needed]}, and marked a major advancement in candlemaking technology, as it burned more cleanly and reliably than tallow candles and was cheaper to produce.^[6]

In chemistry, paraffin is used synonymously with alkane, indicating hydrocarbons with the general formula C_nH_2n+2. The name is derived from Latin parum ("barely") + affinis, meaning "lacking affinity" or "lacking reactivity", referring to paraffin's unreactive nature.^[7]

Properties

Paraffin wax is mostly found as a white, odorless, tasteless, waxy solid, with a typical melting point between about 46 and 68 °C (115 and 154 °F),^[8] and a density of around 900 kg/m³.^[9] It is insoluble in water, but soluble in ether, benzene, and certain esters. Paraffin is unaffected by most common chemical reagents but burns readily.^[10] Its heat of combustion is 42 MJ/kg.

The hydrocarbon C₃₁H₆₄ is a typical component of paraffin wax.

Paraffin wax is an excellent electrical insulator, with a resistivity of between 10¹³ and 10¹⁷ohm metre.^[11] This is better than nearly all other materials except some plastics (notably Teflon). It is an effective neutron moderator and was used in James Chadwick's 1932 experiments to identify the neutron.^[12][13]

Paraffin wax is an excellent material for storing heat, with a specific heat capacity of 2.14–2.9 J g⁻¹ K⁻¹ (joules per gram kelvin) and a heat of fusion of 200–220 J g⁻¹.^[14] Paraffin wax phase-change cooling coupled with retractable radiators was used to cool the electronics of the Lunar Roving Vehicle during the manned missions to the Moon in the early 1970s.^[15] Wax expands considerably when it melts and this allows its use in wax element thermostats for industrial, domestic and, particularly, automobile purposes.^[16][17]

History

Paraffin wax was first created in 1830 by the German chemist Karl von Reichenbach when he tried to develop the means to efficiently separate and refine the waxy substances naturally occurring in petroleum. Paraffin represented a major advance in the candlemaking industry, because it burned more cleanly and reliably, and was cheaper to manufacture than any other candle fuel. Paraffin wax initially suffered from a low melting point; however, this shortcoming was later remedied by the addition of harder stearic acid. The production of paraffin wax enjoyed a boom in the early 20th century as a result of the growth of the meatpacking and oil industries, which created paraffin and stearic acid as byproducts.^[6]

Manufacturing

The feedstock for paraffin is slack wax, which is a mixture of oil and wax, a byproduct from the refining of lubricating oil.

The first step in making paraffin wax is to remove the oil (de-oiling or de-waxing) from the slack wax. The oil is separated by crystallization. Most commonly, the slack wax is heated, mixed with one or more solvents such as a ketone and then cooled. As it cools, wax crystallizes out of the solution, leaving only oil. This mixture is filtered into two streams: solid (wax plus some solvent) and liquid (oil and solvent). After the solvent is recovered by distillation, the resulting products are called "product wax" (or "press wax") and "foots oil". The lower the percentage of oil in the wax, the more refined it is considered (semi-refined versus fully refined).^[18] The product wax may be further processed to remove colors and odors. The wax may finally be blended together to give certain desired properties such as melt point and penetration. Paraffin wax is sold in either liquid or solid form.^[19][20][21]

Applications

In industrial applications, it is often useful to modify the crystal properties of the paraffin wax, typically by adding branching to the existing carbon backbone chain. The modification is usually done with additives, such as EVA copolymers, microcrystalline wax, or forms of polyethylene. The branched properties result in a modified paraffin with a higher viscosity, smaller crystalline structure, and modified functional properties. Pure paraffin wax is rarely used for carving original models for casting metal and other materials in the lost wax process, as it is relatively brittle at room temperature and presents the risks of chipping and breakage when worked. Soft and pliable waxes, like beeswax, may be preferred for such sculpture, but "investment casting waxes," often paraffin-based, are expressly formulated for the purpose.

In a pathology laboratory, paraffin wax is used to impregnate tissue prior to sectioning thin samples of tissue. Water is removed from the tissue through ascending strengths of alcohol (75% to absolute) and the tissue is cleared in an organic solvent such as xylene. The tissue is then placed in paraffin wax for a number of hours and then set in a mold with wax to cool and solidify; sections are then cut on a microtome.

Other uses

• 
  Candle-making


• Wax carving


• Coatings for waxed paper or cloth


• Food-grade paraffin wax:
  
  
  
  • Shiny coating used in candy-making; although edible, it is nondigestible, passing right through the body without being broken down
  
  
  • Coating for many kinds of hard cheese, like Edam cheese
    
  
  
  • Sealant for jars, cans, and bottles
  
  
  • Chewing gum additive
  
  
  
  


• Investment casting


• Anti-caking agent, moisture repellent, and dustbinding coatings for fertilizers
  


• Agent for preparation of specimens for histology
  


• Bullet lubricant – with other ingredients, such as olive oil and beeswax
  


• 
  Phlegmatizing agent, commonly used to stabilise/desensitize high explosives such as RDX
  


• Crayons


• Solid propellant for hybrid rocket motors^[22][23]
  


• Component of surfwax, used for grip on surfboards in surfing
  


• Component of glide wax, used on skis and snowboards
  


• Friction-reducer, for use on handrails and cement ledges, commonly used in skateboarding
  


• Ink. Used as the basis for solid ink different color blocks of wax for thermal printers. The wax is melted and then sprayed on the paper producing images with a shiny surface


• Microwax:^[24]food additive, a glazing agent with E number E905


• 
  Forensic investigations: the nitrate test uses paraffin wax to detect nitrates and nitrites on the hand of a shooting suspect


• 
  Antiozonant agents: blends of paraffin and micro waxes are used in rubber compounds to prevent cracking of the rubber; the admixture of wax migrates to the surface of the product and forms a protective layer. The layer can also act as a release agent, helping the product separate from its mould.^[25]
  


• Mechanical thermostats and actuators, as an expansion medium for activating such devices^[17]
  


• "Potting" guitar pickups, which reduces microphonic feedback caused from the subtle movements of the pole pieces


• "Potting" of local oscillator coils to prevent microphonic frequency modulation in low end FM radios.


• Texitle manufacturing processes, such as that used for Eisengarn thread.


• Wax baths for beauty and therapy purposes


• Thickening agent in many paintballs
  


• 
  Moisturiser in toiletries and cosmetics such as Vaseline.


• Prevents oxidation on the surface of polished steel and iron^[26]
  


• 
  Phase change material for thermal energy storage
  
  • 
    MESSENGER (Mercury spacecraft) When the spacecraft was unable to radiate excessive heat.^[27]
    
  
  


• Manufacture of boiled leather armor and books


• Skateboard wax


• 
  Paraffin microactuator^[28]
  


• 
  Neutron radiation shielding


• Waterproofing agent for waxed cotton garments and commercially important in the early water proofing of ship sails.


• In Occupational and Physical therapies paraffin wax baths are used to warm and loosen connective tissue. They are mainly used in hand therapy.

Occupational safety

People can be exposed to paraffin in the workplace by breathing it in, skin contact, and eye contact. The National Institute for Occupational Safety and Health (NIOSH) has set a recommended exposure limit (REL) for paraffin wax fume exposure of 2 mg/m³ over an 8-hour workday.^[29]

See also

• Oligomer


• Ozokerite

References

External links

Wikimedia Commons has media related to Paraffin wax.