Egftnjytyk

Organogold chemistry is the study of compounds containing gold–carbon bonds. They are studied in academic research, but have not received widespread use otherwise. The dominant oxidation states for organogold compounds are I with coordination number 2 and a linear molecular geometry and III with CN = 4 and a square planar molecular geometry.^[1][2][3] The first organogold compound discovered was gold(I) carbide Au₂C₂, which was first prepared in 1900.^[4]

Gold(I)

Gold(I) complexes are 2-coordinate, linear, diamagnetic, 14 electron species.^[1][2][3] They typically exist as adducts LAuR with as ligand L for instance a triphenylphosphine or an isocyanide. The ligand prevents reduction of Au(I) to metallic Au(0) with dimerization of the organic residue. Gold(I) can also exist as the aurate M[AuR₂] (the ate complex) whereby the cation is usually fitted with a complexing agent to improve stability. The AuR₂⁻ anion is also linear just as other M(d¹⁰) species such as Hg(Me)₂ and Pd(Me)₂²⁺. Gold is known to form acetylides (capable of forming polymeric structures), carbenes and carbynes^{[citation needed]}. The classic method for the preparation of LAuR compounds is by reaction of a Grignard reagent with a gold(I) halide. A subsequent reaction with an organolithium R-Li forms the ate complex.

In a special group of compounds, an aryl carbon atom acts as a bridge between two gold atoms. One such compound, (MesAu)₅, is formed in a reaction between Au(CO)Cl and the mesityl Grignard. Carbon can be coordinated with gold up to a value to 6. Compounds of the type C(AuL)₄ are isolobal with methane and those of type C(AuL)₅⁺ isolobal with the methanium ion. These hypercoordinated organogold clusters are often stabilized by aurophilic interactions between the formally closed-shell gold centers.^[5]

Some typical organogold species with assorted bonding modes.

Gold cyanide compounds (MAu(CN)₂) are of some importance to gold cyanidation, a process for the extraction of gold from low-grade ore. The carbon to metal bond in metal cyanides is usually ionic but evidence exists that the C-Au bonding in the gold cyanide ion is covalent.^[6]

Gold(III)

Gold(III) complexes are 4 coordinate, square planar, diamagnetic, toxic, 16 electron species. When the formal coordination number is less than 4, ligands such as chlorine can make up for it by forming a bridging ligand. Intramolecular chelation is another strategy. In general gold(III) compounds are toxic and therefore less studied than gold(I). Monoarylgold(III) complexes are one well-studied class of complexes. They are often prepared by direct electrophilic auration of arenes by AuCl₃.^[7] Homoleptic tetraalkylaurate(III) complexes (e.g. Li[AuMe₄]) are also well-characterized.^[8]

Gold catalysis

General considerations

Gold-catalyzed reactions fall into two major categories: heterogeneous catalysis including catalysts by gold nanoparticles and thiol-monolayer gold surfaces, and homogeneous catalysis that occurs with gold(I) or gold(III) compounds and is used for organic synthesis.^[9][10] Binary gold halides and simple complexes, including gold(I) chloride, gold(III) chloride, and chloroauric acid, have been employed as complexes. These gold sources, however, give rise to ill-defined and easily deactivated (via reduction to Au⁰) active catalysts in solution. The development of well-defined phosphine- or NHC-ligated gold(I) complexes was an important advance and led to significant increase in interest in the synthetic applications of gold catalysis. Ligated gold(I) complexes are typically prepared and stored as the bench-stable (but unreactive) chlorides, LAuCl, e.g., chloro(triphenylphosphine)gold(I), which are typically activated via halide abstraction with silver salts like AgOTf, AgBF₄, or AgSbF₆ to generate a cationic gold(I) species.^[11][12] Although the coordinatively unsaturated complex "LAu⁺" is notionally generated from a LAuCl/AgX mixture, the exact nature of the cationic gold species and the role of the silver salt remains somewhat contentious.^[13][14][15] The para-nitrobenzoate, bistriflimide, and certain nitrile complexes represent catalytically active yet isolable silver-free precatalysts.

Cationic gold(I) forms π-complexes with alkene or alkyne bonds, following the Dewar-Chatt-Duncanson model. Gold is certainly not the only metal showing this type of bonding and reactivity, several metal ions isolobal with the simple proton (i.e., an empty s-orbital) do as well: for example, mercury(II) and platinum(II). In 2007 Fürstner & Davies ^[16] proposed the term pi-acid as a cognomen for this type of ion (See also: cation-pi interaction).

Gold(I)-alkene and -alkyne complexes are electrophilic and susceptible toward nucleophilic attack. In oxymercuration the resultant organomercurial species is generated stoichiometrically, and requires an additional step to liberate the product. In the case of gold, protonolysis of the Au-C bond closes the catalytic cycle, allowing the coordination of another substrate. Some practical advantages of gold(I) catalysis include: 1) air stability (due to the high oxidation potential of Au(I)), 2) tolerance towards adventitious moisture (due its low oxophilicity), and 3) relatively low toxicity compared to other pi-acids (e.g., Pt(II) and Hg(II)). Chemically, Au(I) complexes typically do not undergo oxidation to higher oxidation states, and Au(I)-alkyls and -vinyls are not susceptible to β hydride elimination.^[17]

Typical mechanism for the gold(I)-catalyzed hydrofunctionalization of alkynes and allenes.

Historical development

In 1976, Thomas and coworkers reported conversion of phenylacetylene to acetophenone using tetrachloroauric acid in a 37% yield.^[18] In this reaction gold(III) was used as a homogeneous catalyst replacing mercury in oxymercuration. This same study lists a published yield >150%, indicating catalysis that perhaps was not acknowledged by the chemists.

In 1991, Utimoto reacted gold(III) (NaAuCl₄) with alkynes and water.^[19] Teles identified a major drawback of this method as Au(III) was rapidly reduced to catalytically dead metallic gold and in 1998 returned to the theme of ligand supported Au(I) for the same transformation:^[20]

This particular reaction demonstrated fantastic catalytic efficiency and would trigger a flurry of research into the use of phosphinegold(I) complexes for the activation C-C multiple bonds in the years to come.^[21] In spite of the lower stability of gold(III) complexes under catalytic conditions, simple AuCl₃ was also found to be an efficient catalyst in some cases. For instance, Hashmi reported a AuCl₃-catalyzed alkyne / furan Diels-Alder reaction - a type of cycloaddition that does not ordinarily occur - for the synthesis of 2,3-disubstituted phenols:^[22]

Further mechanistic studies conclude that this is not a concerted transformation, but rather an initial alkyne hydroarylation followed by a series of non-obvious intramolecular rearrangements, concluding with a 6π electrocyclization and rearomatization.

Relativistic effects are significant in organogold chemistry due to the large nuclear charge of the metal (Z = 79). As a consequence of relativistically expanded 5d orbitals, the LAu fragment can stabilize a neighboring carbocation via electron donation into the empty p-type orbital. Thus, in addition to their expected carbocation-like reactivity, these cations also exhibit significant carbene character, a property that has been exploited in catalytic transformations such as cyclopropanation and C-H insertion.^[23] Propargyl esters can serve as precursors for cationic gold-vinylcarbene intermediates, which can react with alkenes in a concerted manner to afford the cyclopropanation product. The use of a chiral ligand ((R)-DTBM-SEGPHOS) resulted in good to excellent levels of enantioselectivity.^[24]

Although Echavarren first reported the preparation of chiral bisphosphinedigold(I) complexes for enantioselective gold catalysis proceeding via the typical pi-activation mechanism,^[25] an early, atypical example of enantioselective catalysis by gold was described by Hayashi and Ito in 1986.^[26] In this process, benzaldehyde and methyl isocyanoacetate undergo cyclization in the presence of a chiral ferrocenylphosphine ligand and a bis(isocyanide)gold(I) complex to form a chiral oxazoline. Since oxazolines can be hydrolyzed to provide a 1,2-aminoalcohol, this reaction constitutes the first example of a catalytic, asymmetric aldol reaction.

In contrast to the other reactions described above, this reaction does not involve activation of a C-C double or triple bond by gold. In a simple mechanistic picture, gold(I) simultaneously coordinates to two phosphine ligands and the carbon isocyanate group ^[27] which is then attacked by the carbonyl group. Further studies on the bonding mode of Au(I) indicate that this simple picture may have to be revised.

Heterogeneous gold catalysis is an older science. Gold is an attractive metal to use because of its stability against oxidation and its variety in morphology for instance gold cluster materials. Gold has been shown to be effective in low-temperature CO oxidation and acetylene hydrochlorination to vinyl chlorides. The exact nature of the catalytic site in this type of process is debated.^[28] The notion that gold can catalyse a reaction does not imply it is the only way. However, other metals can do the same job inexpensively, notably in recent years iron (see organoiron chemistry).

Gold catalyzed reactions

Although of no commercial importance, gold catalyzes many organic transformations, usually carbon-carbon bond formation from Au(I), and C-X (X = O, N) bond formation from the Au(III) state, due to that ion's harder Lewis acidity. Hong C. Shen summarized homogeneous reactions forming cyclic compounds into 4 main categories:^[29]

• heteroatom nucleophilic addition to unsaturated C-C bonds, especially to form small heterocycles (furans, pyrroles, thiophenes)


• Hydroarylation: basically a Friedel-Crafts reaction using metal-alkyne complexes. Example, the reaction of mesitylene with phenylacetylene:^[30]
  

• Enyne cyclization, in particular cycloisomerization, one early example being a 5-exo-dig 1,6 enyne cycloisomerization:^[31]
  

• 
  cycloaddition reactions with early example the cycloaddition of a nitrile oxide with an alkyne.^[32]
  

Other reactions are the use of gold in C-H bond activation^[33] and aldol reactions. Gold also catalyses coupling reactions.^[34]

Limitations

While gold-catalyzed hydrofunctionalization of alkynes, allenes, and allylic alcohols^[35] occurs readily under comparatively mild conditions, unactivated alkene remain poor substrates in most cases,^[36] in large part due to the resistance of the intermediate alkylgold(I) complexes to protodeauration.^[37] The development of intermolecular gold-catalyzed transformations has also lagged behind the development of intramolecular ones.^[38]

References